# Error about Installation

**URL:** <https://discourse.lynckia.com/t/error-about-installation/172>\
**Category:** Uncategorized\
**Created:** [May 29, 2013, 9:02am UTC](https://discourse.lynckia.com/t/error-about-installation/172 "2013-05-29T09:02:50Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![King\_Chung](https://avatars.discourse-cdn.com/v4/letter/k/db5fbb/32.png) [@King\_Chung](https://discourse.lynckia.com/u/King_Chung)\
**Post date:** [May 29, 2013, 9:02am UTC](https://discourse.lynckia.com/t/error-about-installation/172/1 "2013-05-29T09:02:50Z")

</div>

Hi,

Recently, i installed the platform on my computer according to  
guidelines. But it always throw the error that “cannot find the module  
’./…/…/erizoAPI/build/Release/addon’”, when i ran [initLynckia.sh](http://initLynckia.sh); If  
anything wrong of my environment? My os is OS lion and my node version is  
0.8.9.

Thanks  
King Chung

---

<div class="post-metadata">

**Author:** ![Javier](https://yyz1.discourse-cdn.com/flex031/user_avatar/discourse.lynckia.com/javier/32/20_2.png) [@Javier](https://discourse.lynckia.com/u/Javier)\
**Post date:** [June 4, 2013, 3:06pm UTC](https://discourse.lynckia.com/t/error-about-installation/172/2 "2013-06-04T15:06:44Z")

</div>

Hi again,

It’s probably an error while compiling Erizo, but due to the large amount  
of logs during its installation it’s hard to see errors occured in the  
compilation. Can you send us the logs of installErizo.sh?

Cheers,  
Javier.On 1 June 2013 20:15, King Chung [kimgilschung@gmail.com](mailto:kimgilschung@gmail.com) wrote:

> Hi Javier，
> 
> I have tried to install again and found that the error of libnice  
> installation cause file permission, so i install the libnice manually by  
> running the shell you wrote. And then i ran the installErizo.sh. everything  
> looks ok. But when i init the Lynicia, it throw the other error as below  
> picture. Thanks!
> 
> [https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png](https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png)
> 
> 在 2013年6月1日星期六UTC+8上午10时30分06秒，Javier Cerviño写道：
> 
> > Hi King,
> > 
> > can you try again by updating your code with the ultimate commit we  
> > pushed today?
> > 
> > Please, tell us if this fix the error.
> > 
> > Thank you!
> > 
> > On 31 May 2013 02:57, King Chung [kimgil...@gmail.com](mailto:kimgil...@gmail.com) wrote:
> > 
> > > Finally, I install the Licode and run basic example successfully on  
> > > Linux Mint, but the Mac OS still can not. ☹
> > > 
> > > 在 2013年5月29日星期三UTC+8下午5时02分50秒，\*\*King Chung写道：
> > > 
> > > > Hi,
> > > > 
> > > > Recently, i installed the platform on my computer according to  
> > > > guidelines. But it always throw the error that “cannot find the module  
> > > > ‘./…/…/erizoAPI/build/ **Releas** e/addon’”, when i ran  
> > > > initLynckia.sh; If anything wrong of my environment? My os is OS lion and  
> > > > my node version is 0.8.9.
> > > > 
> > > > Thanks  
> > > > King Chung
> > > 
> > > –  
> > > You received this message because you are subscribed to the Google  
> > > Groups “lynckia” group.  
> > > To unsubscribe from this group and stop receiving emails from it, send  
> > > an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).
> > > 
> > > For more options, visit [https://groups.google.com/\*\*groups/opt\_out](https://groups.google.com/**groups/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > .
> > 
> > –  
> > You received this message because you are subscribed to the Google Groups  
> > “lynckia” group.  
> > To unsubscribe from this group and stop receiving emails from it, send an  
> > email to [lynckia+unsubscribe@googlegroups.com](mailto:lynckia+unsubscribe@googlegroups.com).  
> > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

---

<div class="post-metadata">

**Author:** ![Javier](https://yyz1.discourse-cdn.com/flex031/user_avatar/discourse.lynckia.com/javier/32/20_2.png) [@Javier](https://discourse.lynckia.com/u/Javier)\
**Post date:** [June 1, 2013, 2:30am UTC](https://discourse.lynckia.com/t/error-about-installation/172/3 "2013-06-01T02:30:06Z")

</div>

Hi King,

can you try again by updating your code with the ultimate commit we pushed  
today?

Please, tell us if this fix the error.

Thank you!On 31 May 2013 02:57, King Chung [kimgilschung@gmail.com](mailto:kimgilschung@gmail.com) wrote:

> Finally, I install the Licode and run basic example successfully on Linux  
> Mint, but the Mac OS still can not. ☹
> 
> 在 2013年5月29日星期三UTC+8下午5时02分50秒，King Chung写道：
> 
> > Hi,
> > 
> > Recently, i installed the platform on my computer according to  
> > guidelines. But it always throw the error that “cannot find the module  
> > ‘./…/…/erizoAPI/build/\*\*Release/addon’”, when i ran initLynckia.sh; If  
> > anything wrong of my environment? My os is OS lion and my node version is  
> > 0.8.9.
> > 
> > Thanks  
> > King Chung
> 
> –  
> You received this message because you are subscribed to the Google Groups  
> “lynckia” group.  
> To unsubscribe from this group and stop receiving emails from it, send an  
> email to [lynckia+unsubscribe@googlegroups.com](mailto:lynckia+unsubscribe@googlegroups.com).  
> For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

---

<div class="post-metadata">

**Author:** ![King\_Chung](https://avatars.discourse-cdn.com/v4/letter/k/db5fbb/32.png) [@King\_Chung](https://discourse.lynckia.com/u/King_Chung)\
**Post date:** [June 2, 2013, 3:15am UTC](https://discourse.lynckia.com/t/error-about-installation/172/4 "2013-06-02T03:15:04Z")

</div>

Hi Javier，

I have tried to install again and found that the error of libnice  
installation cause file permission, so i install the libnice manually by  
running the shell you wrote. And then i ran the installErizo.sh. everything  
looks ok. But when i init the Lynicia, it throw the other error as below  
picture. Thanks!

[https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png](https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png)

在 2013年6月1日星期六UTC+8上午10时30分06秒，Javier Cerviño写道：\>

> Hi King,
> 
> can you try again by updating your code with the ultimate commit we pushed  
> today?
> 
> Please, tell us if this fix the error.
> 
> Thank you!
> 
> On 31 May 2013 02:57, King Chung \<[kimgil...@gmail.com](mailto:kimgil...@gmail.com) \<javascript:\>\>wrote:
> 
> > Finally, I install the Licode and run basic example successfully on Linux  
> > Mint, but the Mac OS still can not. ☹
> > 
> > 在 2013年5月29日星期三UTC+8下午5时02分50秒，King Chung写道：
> > 
> > > Hi,
> > > 
> > > Recently, i installed the platform on my computer according to  
> > > guidelines. But it always throw the error that “cannot find the module  
> > > ‘./…/…/erizoAPI/build/\*\*Release/addon’”, when i ran initLynckia.sh;  
> > > If anything wrong of my environment? My os is OS lion and my node version  
> > > is 0.8.9.
> > > 
> > > Thanks  
> > > King Chung
> > 
> > –  
> > You received this message because you are subscribed to the Google Groups  
> > “lynckia” group.  
> > To unsubscribe from this group and stop receiving emails from it, send an  
> > email to [lynckia+u...@googlegroups.com](mailto:lynckia+u...@googlegroups.com) \<javascript:\>.  
> > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

---

<div class="post-metadata">

**Author:** ![Javier](https://yyz1.discourse-cdn.com/flex031/user_avatar/discourse.lynckia.com/javier/32/20_2.png) [@Javier](https://discourse.lynckia.com/u/Javier)\
**Post date:** [June 17, 2013, 2:56pm UTC](https://discourse.lynckia.com/t/error-about-installation/172/5 "2013-06-17T14:56:25Z")

</div>

Hi King,

According to your logs it seems you didn’t install properly node-waf. It is  
usually installed when installing node with brew in Mac OS X. Try  
re-installing all or installing node-waf manually, using brew.

Dennis, I think you could have the same problem. Please, check the logs to  
see if the installer complains about using node-waf. It would be  
interesting that if any of you resolve the problem let us know the solution.

Thanks again for testing Licode!

Cheers,  
Javier.On 8 June 2013 16:33, Dennis Mårtensson [me@dennis.is](mailto:me@dennis.is) wrote:

> Hi, I am experiensing the same problem. I am running OS X mountain lion.
> 
> Do you have any ide whats going wrong? Can I help out solving the problems  
> any way?
> 
> Like what I have see of the project!
> 
> Keep the good work up!
> 
> /Dennis
> 
> Den torsdagen den 6:e juni 2013 kl. 09:08:28 UTC+2 skrev King Chung:
> 
> > Hi Javier,  
> > The attachment is whole of the logs of installErizo.sh, please check it.  
> > Thanks!
> > 
> > Regards,  
> > King
> > 
> > 2013/6/4 Javier Cerviño [jca...@gmail.com](mailto:jca...@gmail.com)
> > 
> > > Hi again,
> > > 
> > > It’s probably an error while compiling Erizo, but due to the large  
> > > amount of logs during its installation it’s hard to see errors occured in  
> > > the compilation. Can you send us the logs of installErizo.sh?
> > > 
> > > Cheers,  
> > > Javier.
> > > 
> > > On 1 June 2013 20:15, King Chung [kimgil...@gmail.com](mailto:kimgil...@gmail.com) wrote:
> > > 
> > > > Hi Javier，
> > > > 
> > > > I have tried to install again and found that the error of libnice  
> > > > installation cause file permission, so i install the libnice manually by  
> > > > running the shell you wrote. And then i ran the installErizo.sh. everything  
> > > > looks ok. But when i init the Lynicia, it throw the other error as below  
> > > > picture. Thanks!
> > > > 
> > > > [https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png](https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png)
> > > > 
> > > > 在 2013年6月1日星期六UTC+8上午10时30分06秒，\*\*Javier Cerviño写道：
> > > > 
> > > > > Hi King,
> > > > > 
> > > > > can you try again by updating your code with the ultimate commit we  
> > > > > pushed today?
> > > > > 
> > > > > Please, tell us if this fix the error.
> > > > > 
> > > > > Thank you!
> > > > > 
> > > > > On 31 May 2013 02:57, King Chung [kimgil...@gmail.com](mailto:kimgil...@gmail.com) wrote:
> > > > > 
> > > > > > Finally, I install the Licode and run basic example successfully on  
> > > > > > Linux Mint, but the Mac OS still can not. ☹
> > > > > > 
> > > > > > 在 2013年5月29日星期三UTC+8下午5时02分50秒， **K** ing Chung写道：
> > > > > > 
> > > > > > > Hi,
> > > > > > > 
> > > > > > > Recently, i installed the platform on my computer according to  
> > > > > > > guidelines. But it always throw the error that “cannot find the module  
> > > > > > > ‘./…/…/erizoAPI/build/\*\*Releas\*\*\*\*e/addon’”, when i ran  
> > > > > > > initLynckia.sh; If anything wrong of my environment? My os is OS lion and  
> > > > > > > my node version is 0.8.9.
> > > > > > > 
> > > > > > > Thanks  
> > > > > > > King Chung
> > > > > > 
> > > > > > –  
> > > > > > You received this message because you are subscribed to the Google  
> > > > > > Groups “lynckia” group.  
> > > > > > To unsubscribe from this group and stop receiving emails from it,  
> > > > > > send an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).
> > > > > > 
> > > > > > For more options, visit [https://groups.google.com/\*\*grou\*\*ps/opt\_out](https://groups.google.com/ **grou** ps/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > > > > .
> > > > > 
> > > > > –  
> > > > > You received this message because you are subscribed to the Google  
> > > > > Groups “lynckia” group.  
> > > > > To unsubscribe from this group and stop receiving emails from it, send  
> > > > > an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).  
> > > > > For more options, visit [https://groups.google.com/\*\*groups/opt\_out](https://groups.google.com/**groups/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > > > .
> > > 
> > > –  
> > > You received this message because you are subscribed to the Google  
> > > Groups “lynckia” group.  
> > > To unsubscribe from this group and stop receiving emails from it, send  
> > > an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).  
> > > For more options, visit [https://groups.google.com/\*\*groups/opt\_out](https://groups.google.com/**groups/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > .
> > 
> > –  
> > You received this message because you are subscribed to the Google Groups  
> > “lynckia” group.  
> > To unsubscribe from this group and stop receiving emails from it, send an  
> > email to [lynckia+unsubscribe@googlegroups.com](mailto:lynckia+unsubscribe@googlegroups.com).  
> > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

---

<div class="post-metadata">

**Author:** ![King\_Chung](https://avatars.discourse-cdn.com/v4/letter/k/db5fbb/32.png) [@King\_Chung](https://discourse.lynckia.com/u/King_Chung)\
**Post date:** [May 30, 2013, 9:09am UTC](https://discourse.lynckia.com/t/error-about-installation/172/6 "2013-05-30T09:09:33Z")

</div>

Hi all,

[https://lh4.googleusercontent.com/-Sl3NIApn8N4/UacXM4k5YOI/AAAAAAAAAA4/MfXl1rVid08/s1600/屏幕快照+2013-05-30+PM17.01.09.png](https://lh4.googleusercontent.com/-Sl3NIApn8N4/UacXM4k5YOI/AAAAAAAAAA4/MfXl1rVid08/s1600/%E5%B1%8F%E5%B9%95%E5%BF%AB%E7%85%A7+2013-05-30+PM17.01.09.png)  
I have reinstall the Lynckia, but the error is already exists. I found that  
erizoAPI has not install successfully, so i try to run the build.sh to  
install it manully. But it throw the error for me. I have no idea about  
this, if anyone can help me? thank you very much!!

在 2013年5月29日星期三UTC+8下午5时02分50秒，King Chung写道：\>

> Hi,
> 
> Recently, i installed the platform on my computer according to  
> guidelines. But it always throw the error that “cannot find the module  
> ‘./…/…/erizoAPI/build/Release/addon’”, when i ran initLynckia.sh; If  
> anything wrong of my environment? My os is OS lion and my node version is  
> 0.8.9.
> 
> Thanks  
> King Chung

---

<div class="post-metadata">

**Author:** ![King\_Chung](https://avatars.discourse-cdn.com/v4/letter/k/db5fbb/32.png) [@King\_Chung](https://discourse.lynckia.com/u/King_Chung)\
**Post date:** [June 6, 2013, 7:08am UTC](https://discourse.lynckia.com/t/error-about-installation/172/7 "2013-06-06T07:08:28Z")

</div>

Hi Javier,  
The attachment is whole of the logs of installErizo.sh, please check it.  
Thanks!

Regards,  
King2013/6/4 Javier Cerviño [jcague@gmail.com](mailto:jcague@gmail.com)

> Hi again,
> 
> It’s probably an error while compiling Erizo, but due to the large amount  
> of logs during its installation it’s hard to see errors occured in the  
> compilation. Can you send us the logs of installErizo.sh?
> 
> Cheers,  
> Javier.
> 
> On 1 June 2013 20:15, King Chung [kimgilschung@gmail.com](mailto:kimgilschung@gmail.com) wrote:
> 
> > Hi Javier，
> > 
> > I have tried to install again and found that the error of libnice  
> > installation cause file permission, so i install the libnice manually by  
> > running the shell you wrote. And then i ran the installErizo.sh. everything  
> > looks ok. But when i init the Lynicia, it throw the other error as below  
> > picture. Thanks!
> > 
> > [https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png](https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png)
> > 
> > 在 2013年6月1日星期六UTC+8上午10时30分06秒，Javier Cerviño写道：
> > 
> > > Hi King,
> > > 
> > > can you try again by updating your code with the ultimate commit we  
> > > pushed today?
> > > 
> > > Please, tell us if this fix the error.
> > > 
> > > Thank you!
> > > 
> > > On 31 May 2013 02:57, King Chung [kimgil...@gmail.com](mailto:kimgil...@gmail.com) wrote:
> > > 
> > > > Finally, I install the Licode and run basic example successfully on  
> > > > Linux Mint, but the Mac OS still can not. ☹
> > > > 
> > > > 在 2013年5月29日星期三UTC+8下午5时02分50秒，\*\*King Chung写道：
> > > > 
> > > > > Hi,
> > > > > 
> > > > > Recently, i installed the platform on my computer according to  
> > > > > guidelines. But it always throw the error that “cannot find the module  
> > > > > ‘./…/…/erizoAPI/build/ **Releas** e/addon’”, when i ran  
> > > > > initLynckia.sh; If anything wrong of my environment? My os is OS lion and  
> > > > > my node version is 0.8.9.
> > > > > 
> > > > > Thanks  
> > > > > King Chung
> > > > 
> > > > –  
> > > > You received this message because you are subscribed to the Google  
> > > > Groups “lynckia” group.  
> > > > To unsubscribe from this group and stop receiving emails from it, send  
> > > > an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).
> > > > 
> > > > For more options, visit [https://groups.google.com/\*\*groups/opt\_out](https://groups.google.com/**groups/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > > .
> > > 
> > > –  
> > > You received this message because you are subscribed to the Google Groups  
> > > “lynckia” group.  
> > > To unsubscribe from this group and stop receiving emails from it, send an  
> > > email to [lynckia+unsubscribe@googlegroups.com](mailto:lynckia+unsubscribe@googlegroups.com).  
> > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).
> 
> –  
> You received this message because you are subscribed to the Google Groups  
> “lynckia” group.  
> To unsubscribe from this group and stop receiving emails from it, send an  
> email to [lynckia+unsubscribe@googlegroups.com](mailto:lynckia+unsubscribe@googlegroups.com).  
> For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

[install.log](https://discourse.lynckia.com/uploads/lynckia/original/1X/c3a09915eee78445607b4d367c144fdead963bc5.log) (8.1 KB)

---

<div class="post-metadata">

**Author:** ![Dennis\_Martensson](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@Dennis\_Martensson](https://discourse.lynckia.com/u/Dennis_Martensson)\
**Post date:** [June 8, 2013, 2:33pm UTC](https://discourse.lynckia.com/t/error-about-installation/172/8 "2013-06-08T14:33:04Z")

</div>

Hi, I am experiensing the same problem. I am running OS X mountain lion.

Do you have any ide whats going wrong? Can I help out solving the problems  
any way?

Like what I have see of the project!

Keep the good work up!

/Dennis

Den torsdagen den 6:e juni 2013 kl. 09:08:28 UTC+2 skrev King Chung:\>

> Hi Javier,  
> The attachment is whole of the logs of installErizo.sh, please check it.  
> Thanks!
> 
> Regards,  
> King
> 
> 2013/6/4 Javier Cerviño \<[jca...@gmail.com](mailto:jca...@gmail.com) \<javascript:\>\>
> 
> > Hi again,
> > 
> > It’s probably an error while compiling Erizo, but due to the large amount  
> > of logs during its installation it’s hard to see errors occured in the  
> > compilation. Can you send us the logs of installErizo.sh?
> > 
> > Cheers,  
> > Javier.
> > 
> > On 1 June 2013 20:15, King Chung \<[kimgil...@gmail.com](mailto:kimgil...@gmail.com) \<javascript:\>\>wrote:
> > 
> > > Hi Javier，
> > > 
> > > I have tried to install again and found that the error of libnice  
> > > installation cause file permission, so i install the libnice manually by  
> > > running the shell you wrote. And then i ran the installErizo.sh. everything  
> > > looks ok. But when i init the Lynicia, it throw the other error as below  
> > > picture. Thanks!
> > > 
> > > [https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png](https://lh5.googleusercontent.com/-M8QCLAQp3Us/Uaq4fE06wiI/AAAAAAAAABY/Eb-UI9ZSiCY/s1600/QQ20130601-2%402x.png)
> > > 
> > > 在 2013年6月1日星期六UTC+8上午10时30分06秒，Javier Cerviño写道：
> > > 
> > > > Hi King,
> > > > 
> > > > can you try again by updating your code with the ultimate commit we  
> > > > pushed today?
> > > > 
> > > > Please, tell us if this fix the error.
> > > > 
> > > > Thank you!
> > > > 
> > > > On 31 May 2013 02:57, King Chung [kimgil...@gmail.com](mailto:kimgil...@gmail.com) wrote:
> > > > 
> > > > > Finally, I install the Licode and run basic example successfully on  
> > > > > Linux Mint, but the Mac OS still can not. ☹
> > > > > 
> > > > > 在 2013年5月29日星期三UTC+8下午5时02分50秒，\*\*King Chung写道：
> > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > Recently, i installed the platform on my computer according to  
> > > > > > guidelines. But it always throw the error that “cannot find the module  
> > > > > > ‘./…/…/erizoAPI/build/ **Releas** e/addon’”, when i ran  
> > > > > > initLynckia.sh; If anything wrong of my environment? My os is OS lion and  
> > > > > > my node version is 0.8.9.
> > > > > > 
> > > > > > Thanks  
> > > > > > King Chung
> > > > > 
> > > > > –  
> > > > > You received this message because you are subscribed to the Google  
> > > > > Groups “lynckia” group.  
> > > > > To unsubscribe from this group and stop receiving emails from it, send  
> > > > > an email to lynckia+u…@\*\*[googlegroups.com](http://googlegroups.com).
> > > > > 
> > > > > For more options, visit [https://groups.google.com/\*\*groups/opt\_out](https://groups.google.com/**groups/opt_out)[https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out)  
> > > > > .
> > > > 
> > > > –  
> > > > You received this message because you are subscribed to the Google  
> > > > Groups “lynckia” group.  
> > > > To unsubscribe from this group and stop receiving emails from it, send  
> > > > an email to [lynckia+u...@googlegroups.com](mailto:lynckia+u...@googlegroups.com) \<javascript:\>.  
> > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).
> > 
> > –  
> > You received this message because you are subscribed to the Google Groups  
> > “lynckia” group.  
> > To unsubscribe from this group and stop receiving emails from it, send an  
> > email to [lynckia+u...@googlegroups.com](mailto:lynckia+u...@googlegroups.com) \<javascript:\>.  
> > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).

---

<div class="post-metadata">

**Author:** ![King\_Chung](https://avatars.discourse-cdn.com/v4/letter/k/db5fbb/32.png) [@King\_Chung](https://discourse.lynckia.com/u/King_Chung)\
**Post date:** [May 31, 2013, 2:57am UTC](https://discourse.lynckia.com/t/error-about-installation/172/9 "2013-05-31T02:57:24Z")

</div>

Finally, I install the Licode and run basic example successfully on Linux  
Mint, but the Mac OS still can not. ☹

在 2013年5月29日星期三UTC+8下午5时02分50秒，King Chung写道：\>

> Hi,
> 
> Recently, i installed the platform on my computer according to  
> guidelines. But it always throw the error that “cannot find the module  
> ‘./…/…/erizoAPI/build/Release/addon’”, when i ran initLynckia.sh; If  
> anything wrong of my environment? My os is OS lion and my node version is  
> 0.8.9.
> 
> Thanks  
> King Chung