# Link broken on Lynckia project page

**URL:** <https://discourse.lynckia.com/t/link-broken-on-lynckia-project-page/486>\
**Category:** Support\
**Created:** [May 4, 2017, 12:54am UTC](https://discourse.lynckia.com/t/link-broken-on-lynckia-project-page/486 "2017-05-04T00:54:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![windsurfdrew](https://avatars.discourse-cdn.com/v4/letter/w/c5a1d2/32.png) [@windsurfdrew](https://discourse.lynckia.com/u/windsurfdrew)\
**Post date:** [May 4, 2017, 12:54am UTC](https://discourse.lynckia.com/t/link-broken-on-lynckia-project-page/486/1 "2017-05-04T00:54:24Z")

</div>

Now that the install instructions have been split into “Docker” and “From Source”, the “Start Using it” link is on the Licode home page is not working.

---

<div class="post-metadata">

**Author:** ![pedro](https://yyz1.discourse-cdn.com/flex031/user_avatar/discourse.lynckia.com/pedro/32/24_2.png) [@pedro](https://discourse.lynckia.com/u/pedro)\
**Post date:** [May 10, 2017, 7:59am UTC](https://discourse.lynckia.com/t/link-broken-on-lynckia-project-page/486/2 "2017-05-10T07:59:15Z")

</div>

Ops, my bad.

Should be fixed now. Thanks!